home_control/README.md

# home_control

Detects an arrival when an iPhone reconnects to a Zyxel EX5601-T1. The service
logs into the router's encrypted web API and polls its active LAN clients.

1. Install dependencies: `python -m pip install -r requirements.txt`
2. Fill in the router login and the iPhone Wi-Fi MAC address under
   `arrival_detection` in `service.yaml`.
3. Test connectivity: `python service.py --once`
4. Run continuously: `python service.py`

An arrival is logged after the phone was confirmed absent and then present. It
also calls `send_notification()` from `notify.py`; its message, ntfy topic, and
timeout are configured under `arrival_detection.notification`. Set
`arrival_detection.enabled` to `false` to disable this function.

On the iPhone, open **Settings > Wi-Fi**, tap the info button beside the home
network, and copy **Wi-Fi Address**. If Private Wi-Fi Address is enabled, that
per-network address is the correct one to configure.

## Install as a systemd service

The included unit expects the project and its virtual environment at
`/opt/home_control`, owned by a dedicated `home-control` system user:

```bash
sudo useradd --system --home-dir /opt/home_control --shell /usr/sbin/nologin home-control
sudo chown -R home-control:home-control /opt/home_control
sudo chmod 600 /opt/home_control/service.yaml
sudo cp /opt/home_control/home-control.service /etc/systemd/system/
sudo systemctl daemon-reload
sudo systemctl enable --now home-control.service
```

Check its state and follow its logs with:

```bash
sudo systemctl status home-control.service
sudo journalctl -u home-control.service -f
```